New Tutorials Every Week!

Thumb Joystick | A Beginner’s Guide

Push the joystick and watch the LCD react in real time. This project reads a 2-axis analog joystick and displays its direction as UP, DOWN,…

BTS7960 motor driver wiring test with Arduino Uno, DC motor, jumper wires, and external 12V DC 1A power supply

Motor Drive (BTS7960 43A) | A Beginner’s Guide

Don’t wait until your full project is done to find out your BTS7960 43A motor driver has a problem. ⚙️😎 A fast bench test can catch wiring mistakes, weak power, or bad behavior before they cost you time and parts. This guide uses a short Arduino sketch that makes the motor run forward, stop, reverse, and stop again in a loop.

Raspberry Pi Pico (RP2040) | A Beginner’s Guide

If you’re coming from Arduino Uno, the Raspberry Pi Pico can feel confusing at first—especially when it doesn’t immediately show a COM port. ✨🧐 Sometimes it appears as a USB drive or a UF2 board, and beginners assume something is broken.

ESP32 external LED control via Wi-Fi using web server

External LED via Wi-Fi | ESP32 Mini Guide

Tap a button on your phone and watch an LED light up across the room. 🔴📶 This External LED via Wi-Fi turns an ESP32 into a tiny web server that hosts a page with ON/OFF buttons.

Continue Reading External LED via Wi-Fi | ESP32 Mini Guide

3D Mini Water Dispenser | Circuit Easy Build

Bring the faucet to your desk. If the shared dispenser is a walk away, this pocket-size 3D Mini Water Dispenser puts a spout right beside your cup. 🥛 💧✨ Press the button and water flows; release and it stops—simple, fast, and tidy.

Continue Reading 3D Mini Water Dispenser | Circuit Easy Build

Arduino LED Matrix | A Beginner’s Guide

Press power, watch color happen. This beginner-friendly project drives a 64-pixel (8×8) NeoPixel matrix from an Arduino and paints it with a smooth, rotating rainbow. 🌈🚥

Continue Reading Arduino LED Matrix | A Beginner’s Guide
3D DIY Soundbox with Arduino Nano, OLED display, and MP3 module – automatic music player with timed on-screen lyrics.

3D DIY Soundbox | Arduino Project Idea

Boot. Play. Sing. As soon as you power on, the 3D DIY Soundbox. There is no phone, no pairing, and no app—just instant music with on-device lyrics. . 💾♪♫𝄞

Continue Reading 3D DIY Soundbox | Arduino Project Idea

Arduino Analog Multiplexer | A Begginner’s Guide

Running out of pins? Imagine reading 16 sensors with only one Arduino input. That’s what the HP4067 does: ⚙️⚡

Continue Reading Arduino Analog Multiplexer | A Begginner’s Guide
3D Smart Cane na may ultrasonic sensor at LED alert — 3D-printed handle by Circuitrocks

3D Smart Cane | Arduino Project Idea

One step from a collision? Not today. 👨‍🦯😎 The 3D SMART CANE “sees” ahead and warns you before the tip hits anything. A quick beep and bright LEDs cue you to steer clear, so walking stays calm and confident.

Continue Reading 3D Smart Cane | Arduino Project Idea
Touch-o-Lantern: 3D-printed pumpkin prop with capacitive touch, Arduino-controlled LED + sound — Circuitrocks

Touch-o-Lantern | Arduino Halloween Project Idea

One tap. A red flash. A creepy laugh. 🎃🔊 If you want a prop that makes guests jump—and then lean in for more—meet Touch o Lantern.

Continue Reading Touch-o-Lantern | Arduino Halloween Project Idea